标准详细信息
无菌吹灌旋一体机通用技术要求 |
||||
| 标准编号：GB/T 41124-2021e | 标准状态： 现行 | 阅读打印版价格： 708.0 |
|
|
标准简介
适用范围：
This document specifies the terms and definitions, model, type, basic parameters, working conditions and technical requirements, and describes the test methods, inspection regulations, marking, packaging, transportation and storage, etc.of the aseptic blowing-filling-capping bloc.
This document is applicable to the design, manufacture, inspection and application of the aseptic blowing-filling-capping bloc (hereinafter referred to as "the aseptic bloc") using polyethylene terephthalate (PET) bottle making process in two-stage method.
This document is applicable to the design, manufacture, inspection and application of the aseptic blowing-filling-capping bloc (hereinafter referred to as "the aseptic bloc") using polyethylene terephthalate (PET) bottle making process in two-stage method.
标准编号：
GB/T 41124-2021e标准名称：
无菌吹灌旋一体机通用技术要求英文名称：
General technical requirements for aseptic blowing-filling-capping bloc标准状态：
现行发布日期：
2021-12-31实施日期：
2022-07-01出版语种：
英文
替代以下标准：
被以下标准替代：
引用标准：
GB/T 191,GB 2894,GB/T 4208-2017,GB 4789.2,GB 4806.1,GB 5009.226-2016,GB/T 5226.1-2019,GB 5749,GB/T 7311,GB/T 9969,GB/T 13277.1-2008,GB/T 13306,GB/T 13384,GB/T 14253,GB 14881,GB 15179,GB/T 16292,GB/T 16293,GB/T 16294,GB 16798,GB/T 17876-2010,GB/T 19063-2009,GB/T 19891,GB/T 24571-2009,GB/T 28118,GB/T 33467-2016,GB/T 38461,GB/T 38463-2020,GB 50073,GB 50457-2019,GBZ/T 300.48-2017,JB/T 7232,JJF 1070,Pharmacopoeia of the People's Republic of China(2020 Edition) Volume IV采用标准：
采标名称：
采标程度：
标准类型：
CN标准属性：
GBE标准编号：
41124起草人：
起草单位：
归口单位：
SAC/TC 436 National Technical Committee on Packaging Machinery Standardization Administration of China.提出部门：
SAC/TC 436 National Technical Committee on Packaging Machinery Standardization Administration of China.发布部门：
State Administration for Market Regulation and Standardization Administration of the People's Republic of China
